Synchronous Motor Phase Control By Vector Addition of Induced Winding Voltages

Daniel J. Simon; Dennis L. Feucht

doi:10.1109/TIE.2004.825367

Synchronous Motor Phase Control By Vector Addition of Induced Winding Voltages

Daniel J. Simon
, Dennis L. Feucht

Innovatia Laboratories

Research output: Contribution to journal › Article › peer-review

Abstract

We propose a simple low-cost approach to the winding-sensed control of three-phase synchronous permanent-magnet motors. Our approach results from a straightforward but elegant application of vector-based motor theory. The method therefore does not depend on the differential equations that describe the motor dynamics, and it does not depend on the particular motor parameters. The single method we derive applies to both wye- and delta-configured motors. We vectorially sum the voltage waveforms at the motor terminals in a certain way and use their zero crossings to produce a correctly phased six-step switch sequence. We discuss the implementation for both wye- and delta-configured motors, and we present experimental results for a delta-configured implementation.

Original language	American English
Journal	IEEE Transactions on Industrial Electronics
Volume	51
DOIs	https://doi.org/10.1109/TIE.2004.825367
State	Published - Jun 1 2004

Keywords

brushless rotating machines
motor drives
permanent-magnet motors

Disciplines

Electrical and Computer Engineering
Materials Science and Engineering
Structural Materials

Access to Document

10.1109/TIE.2004.825367License: CC BY

Synchronous Motor Phase Control By Vector Addition of Induced WinFinal published version, 6.32 MBLicense: CC BY

Cite this

@article{2c066a18c306456890ecdfb243e14f4b,

title = "Synchronous Motor Phase Control By Vector Addition of Induced Winding Voltages",

abstract = " We propose a simple low-cost approach to the winding-sensed control of three-phase synchronous permanent-magnet motors. Our approach results from a straightforward but elegant application of vector-based motor theory. The method therefore does not depend on the differential equations that describe the motor dynamics, and it does not depend on the particular motor parameters. The single method we derive applies to both wye- and delta-configured motors. We vectorially sum the voltage waveforms at the motor terminals in a certain way and use their zero crossings to produce a correctly phased six-step switch sequence. We discuss the implementation for both wye- and delta-configured motors, and we present experimental results for a delta-configured implementation.",

keywords = "brushless rotating machines, motor drives, permanent-magnet motors",

author = "Simon, \{Daniel J.\} and Feucht, \{Dennis L.\}",

note = "Simon, D.; Feucht, D.L.; , {"}Synchronous motor phase control by vector addition of induced winding voltages,{"} Industrial Electronics, IEEE Transactions on , vol.51, no.3, pp. 537- 544, June 2004 doi: 10.1109/TIE.2004.825367",

year = "2004",

month = jun,

day = "1",

doi = "10.1109/TIE.2004.825367",

language = "American English",

volume = "51",

journal = "IEEE Transactions on Industrial Electronics",

}

TY - JOUR

T1 - Synchronous Motor Phase Control By Vector Addition of Induced Winding Voltages

AU - Simon, Daniel J.

AU - Feucht, Dennis L.

N1 - Simon, D.; Feucht, D.L.; , "Synchronous motor phase control by vector addition of induced winding voltages," Industrial Electronics, IEEE Transactions on , vol.51, no.3, pp. 537- 544, June 2004 doi: 10.1109/TIE.2004.825367

PY - 2004/6/1

Y1 - 2004/6/1

N2 - We propose a simple low-cost approach to the winding-sensed control of three-phase synchronous permanent-magnet motors. Our approach results from a straightforward but elegant application of vector-based motor theory. The method therefore does not depend on the differential equations that describe the motor dynamics, and it does not depend on the particular motor parameters. The single method we derive applies to both wye- and delta-configured motors. We vectorially sum the voltage waveforms at the motor terminals in a certain way and use their zero crossings to produce a correctly phased six-step switch sequence. We discuss the implementation for both wye- and delta-configured motors, and we present experimental results for a delta-configured implementation.

AB - We propose a simple low-cost approach to the winding-sensed control of three-phase synchronous permanent-magnet motors. Our approach results from a straightforward but elegant application of vector-based motor theory. The method therefore does not depend on the differential equations that describe the motor dynamics, and it does not depend on the particular motor parameters. The single method we derive applies to both wye- and delta-configured motors. We vectorially sum the voltage waveforms at the motor terminals in a certain way and use their zero crossings to produce a correctly phased six-step switch sequence. We discuss the implementation for both wye- and delta-configured motors, and we present experimental results for a delta-configured implementation.

KW - brushless rotating machines

KW - motor drives

KW - permanent-magnet motors

UR - https://engagedscholarship.csuohio.edu/enece_facpub/21

U2 - 10.1109/TIE.2004.825367

DO - 10.1109/TIE.2004.825367

M3 - Article

VL - 51

JO - IEEE Transactions on Industrial Electronics

JF - IEEE Transactions on Industrial Electronics

ER -

Synchronous Motor Phase Control By Vector Addition of Induced Winding Voltages

Abstract

Keywords

Disciplines

Access to Document

Other files and links

Cite this